News

Home / News / How to use the climbing rigging safety belt

How to use the climbing rigging safety belt

The use of safety belts for climbing equipment, high-altitude operations on construction sites, and a lot of overlap and cross operations. In order to avoid the possible fall of the constructor at a certain height and position, it is necessary for the operator to wear a safety belt when climbing and working at a height. Countless cases have proved that seat belts are life-saving belts, but a few people feel that wearing seat belts is troublesome and inconvenient to walk up and down, especially for small and temporary tasks. As everyone knows, the incident happened in an instant, so it is necessary to wear seat belts in accordance with regulations when working at heights.
When using Denggao equipment, you should check the status of the seat belt to see if it can meet the conditions of use. Before wearing a seat belt, the first thing we need to do is to check the quality of the seat belt to ensure that it can be used safely. Check whether there are no broken wires and significant scratches on the nylon belt, no visible cracks in the metal hook, and whether the hook locking device is available. Fasten the chest strap of the seat belt first. The process of putting on a seat belt needs to be carried out in a certain order. The first step is to wear a safe chest belt. Then fasten the belt of the seat belt. To tighten the waist belt, the waist buckle components must be tightened upright. Then fasten the leg straps of the seat belt. The next step for the staff to put on the seat belt is to fasten the leg belt of the seat belt, and the leg belt should be kept at an appropriate amount of tightness. Hang the seat belt in a suitable position. Use high-hanging and low-hanging methods for safety belts, and avoid swings, collisions, sharp objects, and open flames. Choose a place to hang and lock the metal lock. The hooks and loops of the safety belt should be hung firmly on the mooring point during operation. The seat belt rope cannot be knotted.
The climbing rigging should be checked and stored for maintenance after using the seat belt. The seat belt is a kind of guarantee for safe operation at height. After using the seat belt, you should remember to check whether the seat belt is damaged, and carry out preservation and maintenance after admitting that it is correct. When working at high altitude, you should ensure that the hooks and loops of the safety belt are fixed, and you cannot move the hooks and loops at will to avoid risk.